I am a happy little sander! There is a lot of things to do but my board is getting here shape!
Just by curiosity I weighed it: 2743 gr! And I still have to trim the nose, the tail and the fin slots need to be routed out more.... It gonna be light!
winter project: a wooden hollow surfboard. From A to Z with balsa and no experience... I can't wait to try it out with some good swell!
Saturday, February 5, 2011
SAND SAND SAND SAND SAND SAND SAND SAND SAND SAND, what else?!
This time I removed the tape.... It's not bad but it's far from good the glue line need to be sanded hooray!!
It is good that I have a hand planner, it'll save me hours and hours!
It is good that I have a hand planner, it'll save me hours and hours!
Thursday, January 27, 2011
Time to shave some wood!
I am amazed how efficient a hand planer is.
I just bought one from Home Depot, 10 bucks, sharpened the blade very well and voila: top notch tool for the poor!
I just bought one from Home Depot, 10 bucks, sharpened the blade very well and voila: top notch tool for the poor!
The rails are on!
This week-end I cut and glued the rails from two big balsa sticks. Unfortunately the 2 sticks didn't have the same density, so I have tried to spread the weight evenly between the 2 sides by altering the "rail blocks". Therefore, an uneven wood color is noticeable... I am not very happy about it but at least the board stays balanced.
Tuesday, January 18, 2011
It start to look like something....
...well almost. The upper deck was glued few days ago and I roughly trimmed the rails tonight. The space for the leash was "routed-out" in the upper deck. I already can tell that the two decks will require heavy sanding to smooth them up. It's a good thing that I love sanding ;-).
Sunday, January 9, 2011
Leash Plug.
I will use a plug that have this gortex membrane on the bottom to prevent pressurization and delamination. To vent the board I just drill with the router the space for the plug and on the bottom a little hole should be enough. Well, I hope!
Fin insert
I'm going to use the fusion system from FCS, five of them! So the board will be a quad/thruster. For that, I have cut some piece of balsa blocks and spent quit a long time to adjust them for the board. After gluing them, I have figured out that I should may have been using some thinner one. Let say that I love to sand and I had a lot of love to give on those inserts!!!
After hours and hours of sawing and sanding, everything start to look ok! I am almost ready to close the board with the upper deck!
After hours and hours of sawing and sanding, everything start to look ok! I am almost ready to close the board with the upper deck!
Subscribe to:
Posts (Atom)